(0352)42-30-60, (067)351-44-63

Mon-Fri 9.00-17.00, Sat - 09.00-13.00

Attic ladders FAKRO

   

The main advantages

Compactness. They do not take much space and can solve the problem of rise up from one level to another, even in limited conditions and in small ceiling hole when mounting of stairs is impossible.
The principle of convenient and safe rise up and down. These types of stairs are easily adjusted to the peculiarities of rooms, long-life and reliable, and variety of designs allow them to be produced in individual sizes and due to the customer’s requirements.
Unlimited designer’s fantasy. Typically, attic ladders are delivered unpainted so you can adjust them for individual interior space and an aesthetically accomplished hatch does not require additional processing.
The wide opportunity for technical solutions. Ladders Fakro can be equipped with handrails of hatch, dust-proof hatch, reinforced hatch (which is especially important in harsh Russian winters), individual hatch.
New engineering solutions. For fire facilities can be installed sided fire protection, able to delay the spread of fire to 30 minutes. There are electric attic ladders with a maximum lifting to 4 m.
Ease of storage and transportation. Attic ladders Fakro easily decomposed in the stairway and they can be hidden at once using a special rod. A folded ladder is a unit that can be “stored in the ceiling.” Moreover, you can transport attic ladder incredibly easy and it can easily fit in the trunk of your car.

Structure

Thermal insulating hatch has 36mm thickness and is a part of a staircase, made of pine wooden frame planked on both sides of white or beige fiberboard sheets, filled with foam.
The original design of the ladder is produced so that its elements do not take any useful space of the attic. Opening mechanism locks the hatch in a fully open position, providing stair stability. Regulation of springs can choose the moment (force) of lowering the hatch.

Attic ladder LWS Smart

LWS_Smart_s

LWS Smart attic ladders are made of pine wood of higher class. Thermal insulating hatch  planked with  beige fiberboard.

Features

  • mounting system makes it easy to install stairs by two people and make the appropriate ladder height to the height of the room,
  • a lock is within the hatch and there are any elements outside,
  • perfect tightness between the hatch and its box is provided with contour seal which is located in rototilled box,
  • thermal insulating hatch of beige color has 36mm thickness,
  • special profile of steps saves of slipping,
  • steps do not overhand on the side of the ladder.

 

Attic ladder LWK Komfort

fakro-LWK-main

LWK Komfort attic ladders are made of pine wood of higher class, equipped with white thermal insulating hatch. Stairs equipped with a metal handrail and tips. (Tips only in three segment versions)
Specifications: LWK
maximum load 160 kg
coefficient R of stairs 0,9 m² ° C/W
box height 14 cm
step width 8 cm
distance between steps 25 cm
step length 34 cm
step thickness 2 cm
thickness of thermal insulation material 3 cm
Steps overhand of side ladder elements, and enough far from the hatch. This design is much more convinient when you rise up the stairs. Steel red handrail attached to the corner profiles. It facilitates the use of the stairs.
Brown tips are mounted on the last segment of the ladder. They provide a ladder aesthetic look and also improve stability of the stairs.
Features
  • mounting system makes it easy to build stairs by two people and make the appropriate ladder height to the height of the room,
  • a lock is within the hatch and there are any elements outside,
  • perfect tightness between the hatch and its box is provided with contour seal which is located in rototilled box,
  • thermal insulating hatch of white color has 36mm thickness,
  • special profile of steps saves of slipping,
  • aesthetically designed steps overhanded the side of ladder elements,
  • staircase are equipped with handrail and with metal tips (tips only three segment versions)


 

Attic ladders LTK Thermo

LTK_Thermo_s

LTK Thermo attic ladders are three segments staircase made of pine wood of the highest quality. LWK Komfort differs with height of the box, which is 22 cm, and the thermal insulating hatch has 6,6 cm thickness.
Ladders LTK Thermo intended for buildings where there is a large difference in temperature between living space and attic. This is the perfect thermal insulating barrier that minimizes the use of heat.
Specifications

LTK

permissible load 160 kg
coefficient U of stairs 0,76 W/м2K
box height 22 cm
step width 8 cm
distance between steps 25 cm
step length 34 cm
step thickness 2 cm
thickness of thermal insulation material 6 cm
There is a steel red handrail, it facilitates the use of the stairs.
Brown tips provide a ladder aesthetic look and also improve stability of the stairs.
Tips brown stairs provide aesthetic appearance and improved stability.Features

  • mounting system makes it easy to install stairs by two people and make the appropriate ladder height to the height of the room, the stairs are delivered fully assembled and do not require any other mounting works, a lock is within the hatch and there are any elements outside, where condensate can gather, perfect tightness between the hatch and its box is provided with contour seal, thermal insulating hatch of white color has 6,6 cm thickness;
  • special profile of steps saves of slipping,
  • aesthetically designed steps;
  • metal handrail;
  • tips.

LST attic stairs

LST attic ladders are scissors-shaped ladders with thermal insulating hatch of white color and has 3,6 cm thickness. The wooden box is equipped with angle sections for easy mounting. Thank to a special mechanism, a hatch can be left in any position or fully opened.
This guarantees safe assembly and unfold of stairs. Also, it is gave the possibility to remove lock from the construction. A metal ladder is painted with gray RAL 7022. It is possible to enlarge the length of the stairs to the height maximum of 330 cm, mounting steps of LSS.
A ladder staircase has scissors-shaped construction so it is adaptable to the height of the room without trimming.
Thermal insulating hatch of 36 mm thickness significantly limits the waste of heat. Additional thermal insulation is provided with contour sealing.
Scissors-shaped construction of assembly and fixation the hatch in opening position ensures easy use stairs. Sides stairs in the shape of the letter “S” provide a ladder modern look and easier use, acting as a handrail.
Features
  • specially designed ladder angle adjustment mechanism makes it possible to adapt its length to the room height without the need for cutting,
  • sturdy construction of stairs, permissible load: 200 kg,
  • small size of stair box,
  • mounting system is very easy, so two persons can install stairs,
    perfect tightness between the hatch and its box is provided with contour seal,
  • thermal insulating hatch of white color has 3,6 cm thickness,
  • special profile of steps with grooves saves of slipping,
  • 3 year warranty.

 

Installation of stairs FAKRO

 First way:
 1. An aperture, which will be used for installing ladders must not be at less sizes indicated on the package. While selecting the installation place, you should take into consideration the length of the stairs in a disassembled state.
2. To the bottom of the aperture you should attach the additional boards, where the stairs will be set during installation.
3. Installation should perform 2 people. Before the installation, the 1st installer with all necessary equipment (inclinometer, screwdriver, flat key 10 mm, screws) up to the attic. Then it is necessary to raise the stairs to the attic and put it on previously installed additional boards. In places where the screws are screwed, between the box and insert aperture edges put spacers to keep the angles in the corners of the ladder frame. Then fix the ladder box with two screws in front part and two in back part.
4. After the installation, the 2nd installer should take additional boards and open staircase.
NOTE: Do not use stairs before completing installation!
5. Expanding the ladder, the 1st installer should fix ladder’s sides of the staircase at least with two screws each, and fill the gap between the edges of the hole and staircase box with insulating material.
6. Loosen the screws on the side element, tilt the stairs of the hatch and tighten the screws.
7. To adjust the length of the ladder to the height of the room, you should saw off lower part so that after unfolding stairs all the elements form a straight line. For this purpose, you should measure the height of the room in the place of stair installation, and then use the template to mark the position of the sawing line according to the instructions on the template. Saw off lower part of the marked line.
8. In the case where the sawing line should be on a step, you should use the regulator of the height at the side corners. For this purpose, it is necessary to loosen the screws that fix the corners. Then move the ladder in such a way, that the sawing line would be after a step. Adjust the location of the stairs with the side parts can also be used in case of inaccurate sawing of lower part of stairs. In this case it is necessary to loosen the screws that fix the corners and then move stairs up or down then all sections form a straight line, and the lower is on the right place.
9. In some cases also possible to adjust a tilt angle of the ladder by changing the location of the hole, where the side part is fixed.Second way:
1. An aperture, which will be used for installing ladders must not be at less sizes indicated on the package. While selecting the installation place, you should take into consideration the length of the stairs in a disassembled state.
2. Drop stairs in a prepared aperture with bars attached by cord. Between boards and the ceiling you should leave a gap of 1 cm, if you use decorative panels.
3. Installation should perform 2 people. Before the installation, the 1st installer with all necessary equipment (inclinometer, screwdriver, flat key 10 mm, screws) up to the attic. Then it is necessary to raise the stairs to the attic and put it on previously installed additional boards. In places where the screws are screwed, between the box and insert aperture edges put spacers to keep the angles in the corners of the ladder frame. With the help of mounting wedges combine plane of the hatch with the ceiling plane.
4. Then fix the ladder box with two screws in front part and two in back part. After the installation, the 1nd installer should take additional boards and open staircase.
NOTE: Do not use stairs before completing installation!
5. Expanding the ladder, the 1st installer should fix ladder’s sides of the staircase at least with two screws each, and fill the gap between the edges of the hole and staircase box with insulating material.
6. Loosen the screws on the side element, tilt the stairs of the hatch and tighten the screws.
7. To adjust the length of the ladder to the height of the room, you should saw off lower part so that after unfolding stairs all the elements form a straight line.
8. In the case where the sawing line should be on a step, you should use the regulator of the height at the side corners. For this purpose, it is necessary to loosen the screws that fix the corners. Then move the ladder in such a way, that the sawing line would be after a step. Adjust the location of the stairs with the side parts can also be used in case of inaccurate sawing of lower part of stairs. In this case it is necessary to loosen the screws that fix the corners and then move stairs up or down then all sections form a straight line, and the lower is on the right place.
9. In some cases also possible to adjust a tilt angle of the ladder by changing the location of the hole, where the side part is fixed.
10. Install handrails and fences of the hatch aperture.

Copyright © 2015. All rights reserved. Trade lable Panorama, Window Plant. Using materials, make a link to this website.

Scroll to Top